Magnetic Affinity Separation Particles

Dynabeads Protein G beads are uniform, 2.8-μm superparamagnetic beads with recombinant Protein G (∼17 kDa) covalently coupled to the surface. Dynabeads Protein G beads provide a great alternative to Sepharose resin or agarose resin for immunoprecipitatio

Magnet pulls beads to the bottom of each well. Compatible with PCR-strips and 96-well plates (200 μL) non-skirted and half-skirted and replaces the Dynal MPC-96B. When used in combination with the DynaMag-96 Side on an automation platform, the two magnet

The DynaMag-2 magnet combines a strong magnetic attraction for efficient separations in standard microcentrifuge tubes with a flexible and smart ergonomic design.Optimal working volume: 10–2000 μLHolds up to 16 standard 1.5–2 mL microcentrifuge tubes in

Designed for both automation platforms (e.g., Tecan) and manual workflows, but is compatible with PCR-strips and 96-well plates (200 μL), non-skirted and half-skirted.High wash volumes: DynaMag-96 Side MagnetLow elution volumes: DynaMag-96 Bottom magnetW

For use with Dynabeads ranging from 1–4.5 μm in diameter. Features six bar magnets and is compatible with most 96-well skirted PCR-plates, culture plates, 96-well round bottom plates, 96-well flat bottom plates, 24-well plates, 12-well plates, and 6-well

Dynabeads Protein A beads are uniform, 2.8-μm superparamagnetic beads with recombinant Protein A (∼45 kDa) covalently coupled to the surface. Dynabeads Protein A beads provide a great alternative to Sepharose or agarose resins for immunoprecipitation (IP

Thermo Scientific Pierce Anti-HA Magnetic Beads are affinity particles for immunoprecipitation of recombinant HA-tagged proteins expressed in bacterial or mammalian cells or in vitro systems, using manual or robotic magnetic separators. Features of Anti-

Thermo Scientific Pierce Streptavidin Magnetic Beads accelerate throughput for automated magnetic purification of biotinylated molecules. Features of Streptavidin Magnetic Beads:High-performance beads—non-aggregating, pre-blocked, iron oxide, superparama

Compatible with volumes used in kit protocolsProvides effective magnetic strength from neodymium magnets, which are aligned with plate wells or tubes

The Dynabeads™ Antibody Coupling Kit is intended for the coupling of an antibody or protein to the surface of Dynabeads™ M-270 Epoxy beads. The coupled beads and supplied buffers can then be used for experiments such as immunoassays, immunoprecipitation

The Dynabeads™ Co-Immunoprecipitation Kit is intended for the coupling of an antibody to the surface of Dynabeads™ M-270 Epoxy beads. The coupled beads and supplied buffers can then be used for co-immunoprecipitation (co-IP) of proteins, intact protein c

Dynabeads™ His-Tag Isolation and Pulldown beads are 1-μm monosized, monodispersed, superparamagnetic beads with an NTA-Cobalt-based ligand which has a high affinity towards His-tags and similar structures on molecular targets. Their small but uniform bea

Dynabeads Intact Virus Enrichment beads are 1-μm strong anion exchange magnetic beads that bind negatively charged vesicles and molecules. The beads can enrich for viruses such as, but not limited to, SARS-CoV-2 coronavirus, human immunodeficiency virus

The surface amino groups allow direct covalent binding of carbohydrates, glycoproteins and glycolipids through reductive amination of aldehydes. For use with any sample type.Rapid binding (less than 1 hour) at neutral to high pH and room temperatureNo fu

These surface groups allow covalent amide bond formation to proteins/peptides via primary amino- or sulphydryl groups. For use with any sample type.Immediate and gentle coupling at low temperature and neutral to low pHActivation through carbodiimide is r

Dynabeads™ M-270 Epoxy beads are 2.8 μm superparamagnetic beads containing surface epoxy groups. The beads covalently bind primary amino and sulfhydryl groups in proteins and peptides, making them ideal for coupling antibodies, peptides, intact proteins,

Dynabeads M-280 Sheep anti-Mouse IgG beads are 2.8-μm monosized, monodispersed, superparamagnetic beads with affinity-purified polyclonal sheep anti-mouse IgG covalently bound to the bead surface. These beads are intended for use as a solid support for s

Dynabeads M-280 Sheep Anti-Rabbit IgG are 2.8 μm superparamagnetic beads with affinity-purified polyclonal sheep anti-rabbit IgG covalently bound to the bead surface. These beads are designed to serve as a solid support for simple and efficient binding o

When you wish to covalently couple antibodies, peptides, intact proteins and functional enzymes to the surface of a magnetic bead choose Dynabeads Tosylactivated. Optimal antibody orientation makes these beads an excellent choice for the immunoprecipitat

Surface carboxylic acid groups allow covalent amide bond formation to proteins/peptides via primary amino- or sulphydryl groups. Rapid binding chemistry, activation through carbodimide is required. Amino-modified oligonucleotides, antibodies or other lig

When you wish to covalently couple antibodies, peptides, intact proteins, and functional enzymes to the surface of a magnetic bead choose Dynabeads Tosylactivated. Optimal antibody orientation makes these beads an excellent choice for the immunoprecipita

Space-saving design with our smallest thermal cycler footprintFlexible modular design saves space on deckSeparate control panel module provides flexibility when integrating on the robotic deckChoice of 10 cm,1 meter, and 3 meter cabling optionsAutomated

Dynabeads Protein A Immunoprecipitation Kit is intended for immunoprecipitation (IP) and includes all reagents and buffers required to perform IP in combination with your own antibody. The kit is optimized for standard IP, but can also be used for Co-IP,

Space-saving design with our smallest thermal cycler footprintFlexible modular design saves space on deckThe separate control panel module provides flexibility when integrating on the robotic deckChoice of 10 cm, 1 meter and 3 meter cabling optionsAutoma

Space-saving design with our smallest thermal cycler footprintFlexible modular design saves space on deckThe separate control panel module provides flexibility when integrating on the robotic deckChoice of 10 cm, 1 meter, and 3 meter cabling optionsAutom

Space-saving design with our smallest thermal cycler footprintFlexible modular design saves space on deckSeparate control panel module provides flexibility when integrating on the robotic deckChoice of 10 cm,1 meter and 3 meter cabling optionsAutomated l

Dynabeads Protein G Immunoprecipitation Kit is intended for immunoprecipitation (IP) and includes all reagents and buffers required to perform IP using your own antibody. The kit is optimized for standard IP, but can also be used for Co-IP, chromatin IP

The Dynabeads Protein G IP Kit and Magnet Starter Pack combines Dynabeads Protein G magnetic beads for immunoprecipitation (including the required buffers) and the magnet preferred for use with 1.5 mL microcentrifuge tubes for purchasing convenience. The

DynaGreen CaptureSelect Anti-IgG-Fc (Multi-Species) Magnetic Beads enable high-performance direct and indirect immunoprecipitation while also being an environmentally sustainable choice. DynaGreen CaptureSelect Anti-IgG-Fc (ms) Magnetic Beads are micropl

DynaGreen Protein A Magnetic Beads are intended for use in immunoprecipitation (IP) applications while also being an environmentally sustainable choice. They are microplastic-free submicron magnetic beads that provide reproducible isolation of target pro

DynaGreen Protein A/G Magnetic Beads are intended for use in immunoprecipitation (IP) applications while also being an environmentally sustainable choice. They are microplastic-free submicron magnetic beads that provide reproducible isolation of target p

DynaMag-Spin magnet is optimized for efficient magnetic separation of all types of Dynabeads (range 1–4.5 μm in diameter) in small sample volumes (1.5 mL) in microcentrifuge tubes. The DynaMag-Spin magnet combines a strong magnetic attraction for efficie

Optimized for efficient cell isolation using all types of Dynabeads™ (range 1–4.5 μm in diameter) in standard 15 mL lab tubesHolds 4 tubes and combines a strong magnetic attraction for efficient separations with a flexible and smart ergonomic design that

The DynaMag-5 Magnet accommodates tubes from 11–16 mm in diameter (e.g., flow cytometry tubes and most blood collection tubes), with an optimal working volume of 1–5 mL. The magnet holds 8 tubes and is compatible with all Dynabeads (1–4.5 μm in diameter)

Thermo Scientific HisPur Ni-NTA Magnetic Beads are high-capacity nickel-IMAC beads for affinity purification of His-tagged fusion proteins in manual or automated formats. Features of HisPur Ni-NTA Magnetic Beads:High capacity—equivalent or higher binding

Thermo Scientific™ MagnaBind™ Beads provide a convenient method for magnetic separation of antibodies, antigens, lectins, enzymes, nucleic acids and cells using affinity binding. To remove the MagnaBind Beads from the suspension, an external magnetic fie

Thermo Scientific™ MagnaBind™ Beads provide a convenient method for magnetic separation of antibodies, antigens, lectins, enzymes, nucleic acids and cells using affinity binding. To remove the MagnaBind Beads from the suspension, an external magnetic fie

Thermo Scientific Pierce Anti-c-Myc Magnetic Beads are affinity particles for immunoprecipitation of recombinant c-Myc-tagged proteins expressed in bacterial or mammalian cells or in vitro systems, using manual or robotic magnetic separators. Features of

Product features:Pierce Glutathione Magnetic Agarose Beads are well suited for purifying GST fusion proteins from a soluble protein extract and are ideal for the purification of proteins expressed at low levels from diluted supernatants.The beads can be

Pierce high-capacity EDTA-compatible Ni-IMAC MagBeads are designed for purification of over-expressed His-tagged proteins from cell culture media. The beads have high binding capacity (up to 80 mg of protein per mL of settled beads) and can tolerate the

Pierce High-Capacity Protein A MagBeads, Alkali Stable, are high-performance magnetic beads for purification of antibodies from cell culture supernatant, ascites, serum, and crude extracts. Features of the High-Capacity Protein A MagBeads include:High bi

Thermo Scientific Pierce NHS-Activated Magnetic Beads enable covalent, amine-based conjugation of proteins to magnetic beads in a simple mix-and-go format for use in custom affinity purification experiments. Features of NHS-Activated Magnetic Beads:High

Product features:Ni-NTA Magnetic Agarose Beads are used for small-scale affinity purification as well as high-throughput screening of recombinant His-tagged proteins. The polyhistidine tag is the most popular affinity tag and typically consists of six co

Thermo Scientific Pierce Protein A Magnetic Beads are high-capacity and high-throughput affinity particles for antibody purification and immunoprecipitation methods using manual or robotic magnetic separators. Features of Protein A Magnetic Beads:High ef

Product features:Our recombinant Protein A/G binds to all human IgG subclasses, making it the ideal choice for purification of polyclonal or monoclonal IgG antibodies whose subclass identities have not been determined. In addition, it binds to IgA, IgE,

Thermo Scientific Pierce Protein A/G Magnetic Beads are high-performance affinity particles for antibody purification and immunoprecipitation methods using manual or robotic magnetic separators. Features of Protein A/G Magnetic Beads:High capacity—nearly

Thermo Scientific Pierce Protein G Magnetic Beads are high-capacity and high-throughput affinity particles for antibody purification and immunoprecipitation methods using manual or robotic magnetic separators. Features of Protein G Magnetic Beads:High ef

Thermo Scientific Pierce Protein L Magnetic Beads are high-capacity and high-throughput affinity particles for antibody purification using manual or robotic magnetic separators. Features of Protein L Magnetic Beads:Selective—immobilized Protein L is idea

The DynaMag-50 magnet combines a strong magnetic attraction for efficient separations with a flexible and ergonomic design that ensures comfortable working position. A tilting mechanism on magnet enables you to rest your elbows while pipetting. The magne